Interactive Mode fix on QNAP stty error
Posted: 05 Feb 2024, 08:14
If you encounter on your QNAP using interactive mode the following error:
You can install "Entware_1.03std.qpkg" from
https://www.myqnap.org/product/entware-std/
For most users its the TS-NASX86 version
It is signed and an official one.
Go to Appcenter and install it manually.
Then SSH into your QNAP
Finally to check if everything worked:
Should show
Now you should be able to use interactive mode
Format: Select all
"Bad Terminal: Cannot run program "/bin/stty": error=2, No such file or directory"
https://www.myqnap.org/product/entware-std/
For most users its the TS-NASX86 version
It is signed and an official one.
Go to Appcenter and install it manually.
Then SSH into your QNAP
Format: Select all
sudo /opt/bin/opkg update
Format: Select all
sudo /opt/bin/opkg install coreutils
Format: Select all
sudo ln -s /opt/bin/stty /bin/stty
Format: Select all
which stty
Format: Select all
/bin/stty