FileBot

spikemixture

No, that is above my pay grade.

Rednoah you have tried b4 but a command prompt is not my friend !

I need someone with a Qnap NAS that is using this command " 0 */4 * * * /opt/filebot-node/task 1 "
Or similar.

The script works just does not run every 4 hours.

I would send a picture of the ...

spikemixture

I am back to see if anyone has had success running crontab script every 4 or 6 hours.

The schedule shows in my filebot node in Qnap NAS and runs when I click the schedule.

This is the line in crontab that does not run every 4 hours .

Is "task 1 " correct

0 */4 * * * /opt/filebot-node/task 1

spikemixture

And no reply to my situation !

I also have had the same issue for the last few weeks on a win10 PC and a Qnap NAS
I just tried a dozen locations using PIA vpn and all returned the same result.
Where is the actual Filebot "exe" or app as I wish to add it to my firewall list and see if that helps ...

spikemixture

I received notification of a reply but there is nothing new here!

spikemixture

rednoah wrote: 20 Nov 2020, 07:44
spikemixture wrote: 20 Nov 2020, 05:00 Please point me to 4.9.2 for qnap ?
https://www.filebot.net/linux/qnap.html

THANKS found it

spikemixture

Please point me to 4.9.2 for qnap ?

spikemixture

I also have had the same issue for the last few weeks on a win10 PC and a Qnap NAS

I just tried a dozen locations using PIA vpn and all returned the same result.

Where is the actual Filebot "exe" or app as I wish to add it to my firewall list and see if that helps..

Also I have no issue when I ...

spikemixture

The filebot command itself doesn't have state. But since you're using the FileBot Node WebUI your browser might be remembering some things.

Thanks Red,

You know a helluva lot more than me but I am pretty sure my browser does not save every detail in the Filebot-node settings.
Organize Files ...

spikemixture

Both node and filebot are gone!

Screenshots or it didn't happen. ;)

Filebot node is still in the start menu so i can open the app but no option to remove !!

Granted, the QNAP WebUI is pretty bad, but I'm sure you'll figure it out if you click around a little bit. ;)

Hey Red,
filebot ...

spikemixture

Hi Red,

:arrow: Please uninstall all versions of FileBot you may have installed. Then only install the latest one. Also, use -script fn:name and not -script dev:name just in case.

OK these versions filebot node 0.2.8.7 and filebot 4.9.0 I have.

But i want to delete all and restart but they are ...

spikemixture

The latest revision is currently at FileBot 4.9.0 (r7114) so please try that for good measure:
https://www.filebot.net/forums/viewtopic.php?t=1609

:idea: Use fn:amc for daily usage and not dev:amc . The latter is for developers and early adopters that are always running the latest revision ...

spikemixture

I am running Filebot 4.8.6
and Filebot node 0.2.8.7

Tried 4.8.5 also failed

Still getting this

Sript3.groovy: 41: unable to resolve class org.apache.commons.mail.EmailException
@ line 41, column 5.
} catch(org.apache.commons.mail.EmailException e) {
^

2 errors
at net.filebot.cli ...

spikemixture

Filebot node has been working well for several months.

I have been having issues with both nzbget and sonarr and changed plenty of things.

I am assuming something i did it giving me this error

------------------------------------------

Locking /opt/filebot-node/data/filebot.log
Run script [dev ...

spikemixture

It is now running every 6 hours but not showing in the gui under Schedule. I can live with that

Thanks for all your help.

spikemixture

Ok some good news and some bad news.

My "pushalot" notification showed that file bot ran at 4.am Yes!

But it did not show in the GUI. No really that bad a news.

Will now change it to run every 6 hours .

spikemixture

Nothing shows under schedule.

I guess I should ask - do they show in the GUI at the scheduled time

spikemixture

Have done exactly as you layed out.

Will check tomorrow and see if something happens at 4am!

spikemixture

What actually does "out of the box " mean?
I know what it means but what did u actually do??

spikemixture

Find a Linux-savvy friend and have him figure it out, and then share your solution. ;)

Thanks Rednoah

That's why I posted here. I am hoping someone is doing what I want.
You suggest under Schedule what should work.
It appears no one is actually using the schedule which I find quite odd!

I ...

spikemixture

ok
Have done that

So at 4am it should run.

that is 5 hours time
I will check in the morning

Thanks and will report back'

No luck
No message no nothing !

spikemixture

1. TEST:
/opt/filebot-node/task 1 yes this works

/opt/filebot-node/task 1 > /share/CACHEDEV2_DATA/AAAdata/BACKUPS/crontab.log 2>&1 yes - shows in log

NEXT
2. Which one ?
* * * * * / share/CACHEDEV2_DATA/AAAdata/BACKUPS/crontab.log 2>&1 or
* * * * * date > / share/CACHEDEV2_DATA/AAAdata ...

spikemixture

Nothing for 12 hours

0 */6 * * * /opt/filebot-node/task 1 > /share/CACHEDEV2_DATA/AAAdata/BACKUPS/crontab.log 1>&1

I have created a file called crontab.log in that location and given it permissions

how's that look

What is the number at the end of your example ? Does the log # match the ...

spikemixture

Manually works and have now got the space so it looks like this

Code: Select all

0 */6 * * * /opt/filebot-node/task 1

Will it show in the filebot-node GUI under tasks when/if it runs?

spikemixture

No space between * and /command would be the first obvious issue.

This might help:
https://crontab-generator.org/

EDIT:

Here's a crontab line that definitely works since I'm using it on my QNAP test device for nightly test runs:
0 4 * * * /share/homes/admin/scripts/nightly.sh > /share/homes ...

spikemixture

Code: Select all

0 */6 * * */opt/filebot-node/task 1

I have in the crontab file.

Not working!
What have I done wrong?

Should it be just task?

or should it be run ?

spikemixture

Since having sortmyqpkg installed no issues with opening.

I asked this before and did not get an answer.

Can I set filebot node to run automatically 3x or 4x a day?

spikemixture

[nodejsv8]
Name = nodejsv8
Class = null
Status = complete
Build = 20190627
Display_Name = nodejsv8
Version = 8.9.4.0.1
Author = Justin
QPKG_File = nodejsv8.qpkg
Date = 2019-07-05
Shell = /share/CACHEDEV3_DATA/.qpkg/nodejsv8/nodejsv8.sh
Volume_Select = 3
Install_Path = /share/CACHEDEV3_DATA/.qpkg ...

spikemixture

this is a few of the apps

[filebot-node]
Name = filebot-node
Class = null
Status = complete
Build = 20190705
Display_Name = FileBot Node
Version = 0.2.8.5
Author = FileBot
QPKG_File = filebot-node.qpkg
Date = 2019-07-05
Shell = /share/CACHEDEV1_DATA/.qpkg/filebot-node/filebot-node-service.sh ...

spikemixture

rednoah wrote: 08 Jul 2019, 02:34 I'm still curious what Node package you have installed, and what RC_Number it's got by default.

Node V8.9.0.1

Where and what is RC Number

spikemixture

SortMyQpkgs is an app that sort the loading order.

I had this installed before my rebuild and have just reinstalled it.

Next time I reboot I will see if it "sorts" filebot i theright order. My prediction is it will fix it

spikemixture

/share/CACHEDEV1_DATA$ cat /share/CACHEDEV1_DATA/.qpkg/filebot-node/filebot-node.log
/share/CACHEDEV1_DATA/.qpkg/filebot-node/start: line 35: node: command not found

I had another reboot -(for another reason) and it failed but stopping and starting filebot node got it working

My uneducated ...

spikemixture

Back again with an update.

I had to reboot the NAS this morning and then filbot-node failed with the service not available message.

Stopped and restarted Filebot first with same message. Then I tried filebot Node stopped and restarted got it working.

spikemixture

Here's how you print the log:
cat /share/CACHEDEV1_DATA/.qpkg/filebot-node/filebot-node.log

:idea: Printing the launcher script is unfortunately not helpful, since I've written that myself. :lol:

Ok how this?

Just ran a real test and working well
thanks for the support

/root$ cat ...

spikemixture

Stopped and restarted filebot and filebot node and I am up and running.

Will keep you informed.

Thanks again

spikemixture

Does FileBot Node work now? If not, what does the FileBot Node log say now?

no it does not work and her is the latest log

/share/CACHEDEV1_DATA/.qpkg/filebot-node/start: line 35: /usr/local/bin/node: Permission denied

And here is the start

#!/bin/sh

export FILEBOT_NODE_HOST="127.0.0 ...

spikemixture

rednoah wrote: 05 Jul 2019, 11:37 Does FileBot Node work now? If not, what does the FileBot Node log say now?

no it does not work and her is the latest log

Code: Select all

/share/CACHEDEV1_DATA/.qpkg/filebot-node/start: line 35: /usr/local/bin/node: Permission denied

spikemixture

I've created a new release with improved logging:
https://github.com/filebot/filebot-node/releases/tag/0.2.8.5

Maybe it'll work better now, or at least give as better logging.

Ran the same command -
/$ /home/httpd/cgi-bin/authLogin.cgi
Content-type: text/xml

<?xml version="1.0" encoding ...

spikemixture

rednoah wrote: 05 Jul 2019, 09:51 I've created a new release with improved logging:
https://github.com/filebot/filebot-node ... ag/0.2.8.5

Maybe it'll work better now, or at least give as better logging.

Installing now

spikemixture

I see. It crashes due to QNAP authentication somehow not working. Once it's crashed, it doesn't serve requests anymore, so you'll need to restart it to run tests each time it crashes.

The relevant code starts here:
https://github.com/filebot/filebot-node/blob/master/server-nodejs/app.js#L564

1 ...

spikemixture

Pretty much works exactly the same on any non-Windows device. The file path will be different though.

1. Login via SSH
2. Find log
3. View log

Here's what I get:
$ find / -name filebot-node.log
/share/CACHEDEV1_DATA/.qpkg/filebot-node/filebot-node.log
$ cat /share/CACHEDEV1_DATA/.qpkg/filebot ...

spikemixture

Does that work for QNAP ?

spikemixture

Which log?

spikemixture

Hi Rednoah

I had to rebuild my Qnap NAS - Well still rebuilding 5 days later!!

Now Filebot Node is not working

I have tried multiple combinations of stopping /starting /uninstalling /reinstalling / rebooting NAS

When I stop and Start Filebot and filebot Node sometimes I get to the Gui ...

spikemixture

rednoah wrote: 30 May 2019, 05:18 Strange. Does latest stable release work? I'm not aware of any changes to the qpkg packaging code...

Changed nothing but installed this time .

Thanks for the help
Will see what 4.8.6 does now

spikemixture

rednoah wrote: 29 May 2019, 10:38 Works for me.

You can use the *.sha256 file to check the checksum to make sure you're not using a partially downloaded or corrupted file.

I have java 12 and have downloaded the file 3x
And checked the sha256 file and matches

Still get same error....

spikemixture

Just ignore that. You'll see that with any Java 8 application if it's being run with Java 9 or above.

If you're using Java 12 or above, then you can give the latest BETA a spin, that'll get rid of these warnings and also give you a chance to try the latest and greatest:
https://get.filebot.net ...

spikemixture

This popped up today - have not seen it before and thought i would pass it on

Locking /share/CACHEDEV2_DATA/.qpkg/filebot-node/data/filebot.log
WARNING: An illegal reflective access operation has occurred
WARNING: Illegal reflective access by org.codehaus.groovy.vmplugin.v7.Java7$1 (file:/share ...

spikemixture

Just gotta work out how to set to run automatically 2 (or 3) times a day ???

Can this be done?

spikemixture

rednoah wrote: 18 Mar 2019, 17:00 Sorry, FileBot Node is a front-end for the amc script. FileBot Node does not support the subtitles script, and so you won't be able to find subtitles using FileBot Node.

thanks - a pity though...

spikemixture

Thanks Rednoah,

I am not script literate so "amc script only" means nothing to me.
I know how to logon via SSH but have no idea what command line tool is required.

Please point me to "filebot node for dummies" ..

spikemixture

I have used the desktop version for many years and have bought both that and the node version I am using on my qnap NAS.

It works well for me but I would like 2 things (or point me to where they are):

An option to check the 'completed" (I call mine finished) maybe 3 times a day not just at 4am ...

spikemixture

rednoah wrote: 28 Jan 2019, 17:38 Here you go:
Code: Select all
/share/CACHEDEV1_DATA/MEDIA/movies/{plex.tail}

Thank you.

That does the trick.

When I click execute it is working as my files get converted and moved but atm nothing shows in the script box!
Not a real big deal or have I missed ticking a box somewhere?

spikemixture

Reporting back.
All working well.

Just gotta work out how to set to run automatically 2 (or 3) times a day

spikemixture

I have FB on my Qnap NAS and very happy after several goes at installing and lotsa googling.

Almost go it perfect except the movies .
My format for movies is set as
/share/CACHEDEV1_DATA/MEDIA/{plex}
My movies are in /share/CACHEDEV1_DATA/MEDIA/movies

But FB sends the finished files to /share ...

spikemixture

+ export FILEBOT_NODE_HOST=127.0.0.1
+ FILEBOT_NODE_HOST=127.0.0.1
+ export FILEBOT_NODE_AUTH=QNAP
+ FILEBOT_NODE_AUTH=QNAP
+ export FILEBOT_NODE_HTTP=YES
+ FILEBOT_NODE_HTTP=YES
+ export FILEBOT_NODE_HTTP_PORT=5452
+ FILEBOT_NODE_HTTP_PORT=5452
+ export USER=admin
+ USER=admin
++ awk -vm=1024 -vp ...

spikemixture

Greetings,

I have followed the instructions and all installs smoothly.
Installed the 4 apps from the filebot app center
And Node.js and java 8

But on clicking filebot node I get -

Service Unavailable
The server is temporarily unable to service your request due to maintenance downtime or ...

Search found 56 matches