POSTBUCKET - where random posts in unrelated topics go

Any questions? Need some help?
nicoparker
Donor
Posts: 13
Joined: 18 Nov 2016, 08:34

Re: [DEB] Debian package

Post by nicoparker »

Hmm that's strange, I swear the openjdk-jre8 (and the libs) were listed as a dependency... Any possible mistake on my side?

PS : I didn't use any script, just downloaded the .deb and dpkg -i

PPS : the libjna is the problem, it recommends the default-jre (but not headless)
User avatar
rednoah
The Source
Posts: 22899
Joined: 16 Nov 2011, 08:59
Location: Taipei
Contact:

Re: [DEB] Debian package

Post by rednoah »

You should be able to install everything like so:

Code: Select all

sudo apt-get install --no-install-recommends -y filebot
That should only install the lib-jna and filebot packages with bare minimum dependencies.
:idea: Please read the FAQ and How to Request Help.
apeg
Posts: 4
Joined: 10 Oct 2019, 15:11

Re: Batch Rename any type of file

Post by apeg »

With all the problems TVDB has been having this is exactly what i'm looking for but im having a few problems, the behavior of these options are different in 'generic batch renaming mode':

{n} = full file name minus extension
{'Season '+s} = full file name minus extension
{fn} = blank no value

I'm primarily using filebot for sorting in this case, generic batch renaming is exactly what i need so i dont run into issues every time TVDB is having problems. But show name, season and full file name are still needed.

Any ideas? thanks,
User avatar
rednoah
The Source
Posts: 22899
Joined: 16 Nov 2011, 08:59
Location: Taipei
Contact:

Re: Batch Rename any type of file

Post by rednoah »

In plain file mode:
* n is the filename
* fn is the filename, as usual, same as n in this case
* s is undefined, since files don't have seasons


If you want SxE numbers, or titles, or anything, then you'll have to extract that piece of information by parsing the file name, since the file name is all you've got:

Code: Select all

{f.path.match(/Season (\d+)/)}
:idea: How to parse information from the file name is highly reliant on the file names you have.
:idea: Please read the FAQ and How to Request Help.
nicoparker
Donor
Posts: 13
Joined: 18 Nov 2016, 08:34

Re: [DEB] Debian package

Post by nicoparker »

So I gave the repo a try, but failed :

Code: Select all

root@server:~# apt-key adv --fetch-keys "https://raw.githubusercontent.com/filebot/plugins/master/gpg/maintainer.pub"
Executing: /tmp/tmp.kuHJZvQopu/gpg.1.sh --fetch-keys
https://raw.githubusercontent.com/filebot/plugins/master/gpg/maintainer.pub
gpgkeys: protocol `https' not supported
gpg: no handler for keyserver scheme `https'
gpg: WARNING: unable to fetch URI https://raw.githubusercontent.com/filebot/plugins/master/gpg/maintainer.pub: keyserver error

Code: Select all

root@server:~# wget https://raw.githubusercontent.com/filebot/plugins/master/gpg/maintainer.pub
--2019-11-23 02:03:01--  https://raw.githubusercontent.com/filebot/plugins/master/gpg/maintainer.pub
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.36.133
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.36.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4650 (4.5K) [text/plain]
Saving to: ‘maintainer.pub’

maintainer.pub           100%[===============================>]   4.54K  --.-KB/s    in 0s      

2019-11-23 02:03:01 (17.9 MB/s) - ‘maintainer.pub’ saved [4650/4650]

root@server:~# apt-key adv maintainer.pub 
Executing: /tmp/tmp.5dmHdLUYIf/gpg.1.sh maintainer.pub
pub  4096R/7C3C6A71 2017-04-13 Reinhard Pointner <[email protected]>

Hmmm looks like it worked. Next step, add the repo and apt update :

Code: Select all

root@server:~# apt update
Ign:9 https://get.filebot.net/deb universal-jdk8 InRelease
Get:10 https://get.filebot.net/deb universal-jdk8 Release [1,165 B]
Get:11 https://get.filebot.net/deb universal-jdk8 Release.gpg [862 B]
Ign:11 https://get.filebot.net/deb universal-jdk8 Release.gpg
Reading package lists... Done    
W: GPG error: https://get.filebot.net/deb universal-jdk8 Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 4E402EBF7C3C6A71
E: The repository 'https://get.filebot.net/deb universal-jdk8 Release' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.
Looks like I have a problem with the signature. What did I do wrong?
Regards
User avatar
rednoah
The Source
Posts: 22899
Joined: 16 Nov 2011, 08:59
Location: Taipei
Contact:

Re: [DEB] Debian package

Post by rednoah »

1.
What version of Ubuntu are you using?

2.
Did you use the install script which pre-installs the necessary dependencies, such as gnupg-curl?
https://github.com/filebot/plugins/blob ... deb.sh#L13

Code: Select all

bash -xu <<< "$(curl -fsSL https://raw.githubusercontent.com/filebot/plugins/master/installer/deb.sh)"
:idea: Please read the FAQ and How to Request Help.
plittlefield
Posts: 101
Joined: 09 Mar 2014, 19:15

Re: [DEB] Debian package

Post by plittlefield »

I am currently on FileBot 4.8.2 using the .deb package by hand (a long time ago.)

I've just seen this latest post and out of interest I went through the github script step-by-step with the --simulate option to see what would happen, because this is a headless server with no gui needed.

All was going well but then the last command WAS going to pull in 90 packages which I really don't need :-(

Code: Select all

sudo apt-get --simulate install --install-recommends filebot
So, I changed the install command line to...

Code: Select all

sudo apt-get --simulate install --no-install-recommends filebot
...which was a little better at 45 packages, but those were still loads of X Server related packages.

Is there any way to stop it installing ANY of those?

:-(

Thanks,

Paully
User avatar
rednoah
The Source
Posts: 22899
Joined: 16 Nov 2011, 08:59
Location: Taipei
Contact:

Re: [DEB] Debian package

Post by rednoah »

You can always use the portable and then figure out dependencies manually if disk space is an issue:
viewtopic.php?f=11&t=6057


That being said, according to the package metadata, libjna-java is the only hard dependency, and everything else is optional:

Code: Select all

Depends: libjna-java
Recommends: default-jre, openjfx, mediainfo, libchromaprint-tools, p7zip-full, unrar | unrar-free
Enhances: nautilus-actions
:idea: Please read the FAQ and How to Request Help.
plittlefield
Posts: 101
Joined: 09 Mar 2014, 19:15

Re: [DEB] Debian package

Post by plittlefield »

Space is not a problem, I'm just trying to keep my system lean and mean with as few packages as possible installed and needing to be updated ;-)

OK, so the Beta 4.9.0 is an option with just that 1 dependency, and it seems to only install 2 packages when I simulate...

Code: Select all

$ sudo apt-get --simulate install libjna-java
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  libjna-jni
Suggested packages:
  libjna-java-doc
The following NEW packages will be installed
  libjna-java libjna-jni
0 to upgrade, 2 to newly install, 0 to remove and 4 not to upgrade.
Inst libjna-jni (4.2.2-1 Ubuntu:16.04/xenial [amd64])
Inst libjna-java (4.2.2-1 Ubuntu:16.04/xenial [all])
Conf libjna-jni (4.2.2-1 Ubuntu:16.04/xenial [amd64])
Conf libjna-java (4.2.2-1 Ubuntu:16.04/xenial [all])
...so are you saying that if I install the Beta 4.9.0 deb package, without the 75 recommended packages, my server will not start trying to install them at a later date?

Is there a way to test that?

I guess I could press CTRL+C if it kicks off :-)

Regards,

Paully
plittlefield
Posts: 101
Joined: 09 Mar 2014, 19:15

Re: [DEB] Debian package

Post by plittlefield »

Also, is it best to remove 4.8.2 before I install the Beta 4.9.0 for cleanliness?
User avatar
rednoah
The Source
Posts: 22899
Joined: 16 Nov 2011, 08:59
Location: Taipei
Contact:

Re: [DEB] Debian package

Post by rednoah »

IDK. If you don't want surprised, then you can just not use the apt repository and manage things manually. Regardless, new version will override the old version, apt takes care of that, so no need to worry about cleanliness.
:idea: Please read the FAQ and How to Request Help.
yodaspowart
Posts: 16
Joined: 02 Jun 2017, 01:04

Re: Batch Rename any type of file

Post by yodaspowart »

As the TVDB is down for me on my seedbox (Linux/amc groovy script),
I am now using

Code: Select all

unsortedFormat
Managing to connect and rename to this online FTP folder fine using Mountain Duck and the latest Filebot which is working fine on my Mac.

Code: Select all

--def unsorted=y --def unsortedFormat="Unsorted/{fn =~ /2160p|4K|4k|UHD/ ? 'UHD-2160p/' : fn =~ /1080p/ ? 'HD-1080p' : fn =~ /720p/ ? 'HD-720p' : 'SD'}/{fn}.{ext}"
Image
I have now got TV shows into specific folders for resolution.

Would like to use the file naming setup to match the name of the show in a certain way:
Original file name:

Code: Select all

Legacies.S02E01.HDTV.x264-KILLERS[eztv].mkv
Wanted: Legacies - S02E01 - HDTV x264-KILLERS[eztv]

Not sure how it can be cleaner?

Code: Select all

{fn.before(/S\d{2}E\d{2}/).space(' ')} - {fn.match(/S\d{2}E\d{2}/).space(' ')} - {fn.after(/S\d{2}E\d{2}/).space(' ')}
Using the filebot GUI to test in file mode:
Image
User avatar
rednoah
The Source
Posts: 22899
Joined: 16 Nov 2011, 08:59
Location: Taipei
Contact:

Re: Batch Rename any type of file

Post by rednoah »

If it works, I'd leave it at that. Once you start parsing file names yourself, things necessarily level up in terms of complexity.

If simplification is the goal, at the cost of getting exactly what you want, then here's my solution:

Code: Select all

{fn.replaceAll(/[ .-]+/, ' - ')}

Code: Select all

Legacies - S02E01 - HDTV - x264 - KILLERS[eztv]
:idea: Please read the FAQ and How to Request Help.
plittlefield
Posts: 101
Joined: 09 Mar 2014, 19:15

Re: [DEB] Debian package

Post by plittlefield »

Ooooo, this could be the winning command line, which only installs 3 packages!

Code: Select all

$ sudo apt -s --no-install-recommends install /home/paully/Downloads/filebot/FileBot_4.9.0_universal-jdk8.deb

Reading package lists... Done
Building dependency tree       
Reading state information... Done
Note, selecting 'filebot' instead of '/home/paully/Downloads/filebot/FileBot_4.9.0_universal-jdk8.deb'
The following additional packages will be installed:
  libjna-java libjna-jni
Suggested packages:
  libjna-java-doc
Recommended packages:
  openjdk-8-jre openjfx libchromaprint-tools p7zip-full unrar | unrar-free
The following NEW packages will be installed
  filebot libjna-java libjna-jni
0 to upgrade, 3 to newly install, 0 to remove and 6 not to upgrade.
Inst libjna-jni (4.2.2-1 Ubuntu:16.04/xenial [amd64])
Inst libjna-java (4.2.2-1 Ubuntu:16.04/xenial [all])
Inst filebot (4.9.0 local-deb [all])
Conf libjna-jni (4.2.2-1 Ubuntu:16.04/xenial [amd64])
Conf libjna-java (4.2.2-1 Ubuntu:16.04/xenial [all])
Conf filebot (4.9.0 local-deb [all])
...will filebot work without all the recommended packages?!

Also, I am only running OpenJDK Java v8...

Code: Select all

openjdk version "1.8.0_222"
OpenJDK Runtime Environment (build 1.8.0_222-8u222-b10-1ubuntu1~16.04.1-b10)
OpenJDK 64-Bit Server VM (build 25.222-b10, mixed mode)
Am I good to go?!

:-)

Paully
plittlefield
Posts: 101
Joined: 09 Mar 2014, 19:15

Re: [DEB] Debian package

Post by plittlefield »

OK, so I went for it.

Turns out my current filebot was just a symlink to the TAR version, which made things easier.

Here are my upgrade / install commands as root...

Code: Select all

$ apt install p7zip-full unrar
$ apt --no-install-recommends install FileBot_4.9.0_universal-jdk8.deb
So, I now have this...

Code: Select all

$ filebot -script fn:sysinfo
FileBot 4.9.0 (r6899)
JNA Native: 4.0.1
MediaInfo: 19.09
p7zip: p7zip Version 9.20 (locale=en_GB.UTF-8,Utf16=on,HugeFiles=on,4 CPUs)
unrar: UNRAR 5.30 beta 2 freeware
Chromaprint: java.io.IOException: Cannot run program "fpcalc": error=2, No such file or directory
Extended Attributes: OK
Unicode Filesystem: OK
Script Bundle: 2019-11-16 (r603)
Groovy: 2.5.8
JRE: OpenJDK Runtime Environment 1.8.0_222
JVM: 64-bit OpenJDK 64-Bit Server VM
CPU/MEM: 4 Core / 3.7 GB Max Memory / 33 MB Used Memory
OS: Linux (amd64)
HW: Linux nas 4.15.0-15-generic #16~16.04.1-Ubuntu SMP Thu Apr 5 12:19:23 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
STORAGE: ext4 [/] @ 106 GB | fuse.sshfs [/home/paully/Downloads/seedbox2] @ 990 GB
DATA: /home/paully/.filebot
Package: DEB
License: FileBot License xxxxxxxx (Valid-Until: 2020-07-31)
Done ヾ(@⌒ー⌒@)ノ
...cannot wait to try it out!

Fingers crossed!

Thanks!

Regards,

Paully
yodaspowart
Posts: 16
Joined: 02 Jun 2017, 01:04

Re: Batch Rename any type of file

Post by yodaspowart »

Thanks a lot @rednoah also for quick reply.
It's perfect for me.
yodaspowart
Posts: 16
Joined: 02 Jun 2017, 01:04

Re: Batch Rename any type of file

Post by yodaspowart »

Updated my unsorted folder now:

Currently it's working in case anyone is interested in this:

Code: Select all

--def unsorted=y --def unsortedFormat="Unsorted/{fn =~ /2160p|4K|4k|UHD/ ? 'UHD-2160p/' : fn =~ /1080p/ ? 'HD-1080p' : fn =~ /720p/ ? 'HD-720p' : 'SD'}/{fn.before(/S\d{2}E\d{2}/).upperInitial().space(' ')} - {fn.match(/S\d{2}E\d{2}/).upper()} - {fn.after(/S\d{2}E\d{2}/).stripReleaseInfo().upperInitial().space(' ')} [{allOf{match}{s3d}{hd}{vc}{source}{vf}{('-')}{af}{ac}{channels}{n.findMatch(group) ? null : '- '+group} join ' '}].{ext}" --def exec="curl --insecure https://seedBoxPlexURL:port/library/sections/all/refresh?X-Plex-Token=XXXXXXXXXXXXXXXXXX_X"
Now Plex can pull in the TV shows from my: HD-1080p & UHD-2160p folders.
This is a fallback until TVDB is up and running.
I'm still renaming them properly with the Filebot GUI 4.8.5 through Mountain Duck mounted online FTP drive

Movies rarely go into unsorted.
If they end up here would get named like this:
Original name:

Code: Select all

A.Christmas.Tale.2008.Criterion.576p.BDRip.x264.AC3-Q0S.mp4

becomes:

Code: Select all

A Christmas Tale 2008 Criterion 576p BDRip X264 AC3-Q0S - - A Christmas Tale 2008 Criterion [HD AVC BDRip 1080p - 2ch AAC 2.0]
plittlefield
Posts: 101
Joined: 09 Mar 2014, 19:15

Re: [DEB] Debian package

Post by plittlefield »

Yep, all good :-)

With 4.9.0 the process seems to be faster and better at matching titles.

Thanks for your help and keep up the great work on this time-saving gem.

Paully
guyrivera
Posts: 1
Joined: 06 Dec 2019, 04:19

Re: Plex Naming Schemes

Post by guyrivera »

rednoah wrote: 07 Feb 2019, 14:38 There's no convenience method for this particular use case.

You'll either have to
(A) write your own custom format without using the {plex} binding at all, or
(B) write your own custom format using bits and pieces of the {plex} binding as necessary.

e.g.

Code: Select all

Movies/{plex[1]}{" [$vf.$vc.$ac]"}/{plex[2]}{" [$vf.$vc.$ac]"}

:!: Either way, you'll no longer be strictly adhering to the Plex naming scheme, although it'll probably work.
Thanks a lot - it works!
Yammers
Posts: 21
Joined: 27 Jan 2018, 16:40

Re: How about sharing our format expressions?

Post by Yammers »

Hi i am trying to do an expression that puts the movies into a collection folder if there is more than one but it does not name the folder with the word collection in it any ideas example below

I want it to name the folder Aliens or Alien, then in that folder have Alien 1 (1979) Alien 2 ( Year etc)
sblack55
Posts: 22
Joined: 23 Sep 2015, 18:43

Re: --filter and fine-tuning

Post by sblack55 »

rednoah wrote: 27 Oct 2014, 20:54 You can manage your list of explicitly excluded (or included) shows with an external text file.

Code: Select all

--filter '!readLines('/path/to/excludes.txt').contains(n)'
Having some trouble with this syntax, probably due my failure to grasp the vagaries of script/cmdline quoting. Here are the key lines from my bash script:

Code: Select all

PVR_LOC="/volume1/PVR"
...
sFilter='!readLines('${PVR_LOC}/ExcludeShows.txt').contains(n)'
…
filebot "${sSourceFile}" ${FB_OPTS} -script fn:amc --output "${DEST}" ${sMapper} --filter "${sFilter}" --def seriesFormat="${FB_FMT_SERIES}" --def movieFormat="${FB_FMT_MOVIE}" --def "ut_label=${UTLABEL}">/tmp/fblog.txt 2>&1
And here is my log:

Code: Select all

Dec 08 15:03:38: filebot "/volume1/PVR/record/The Carbonaro Effect/The Carbonaro Effect.S01E12.An Elevated Ferret Alert.ts" -non-strict --action hardlink --conflict auto -script fn:amc --output "/volume1/PVR/General" --mapper episode.derive(0,0) --filter "!readLines(/volume1/PVR/ExcludeShows.txt).contains(n)" --def seriesFormat="TV Shows/{ny}/Season {s}/{n}.{s00e00}.{t}" --def movieFormat="" --def "ut_label=TV"
Dec 08 15:03:50: Run script [fn:amc] at [Sun Dec 08 15:03:42 EST 2019]
Dec 08 15:03:50: Parameter: seriesFormat = TV Shows/{ny}/Season {s}/{n}.{s00e00}.{t}
Dec 08 15:03:50: Parameter: movieFormat =
Dec 08 15:03:50: Parameter: ut_label = TV
Dec 08 15:03:50: Argument[0]: /volume1/PVR/record/The Carbonaro Effect/The Carbonaro Effect.S01E12.An Elevated Ferret Alert.ts
Dec 08 15:03:50: Input: /volume1/PVR/record/The Carbonaro Effect/The Carbonaro Effect.S01E12.An Elevated Ferret Alert.ts
Dec 08 15:03:50: Group: {Series=true} => [The Carbonaro Effect.S01E12.An Elevated Ferret Alert.ts]
Dec 08 15:03:50: ScriptException: org.codehaus.groovy.control.MultipleCompilationErrorsException: startup failed:
Dec 08 15:03:50: Script2.groovy: 1: unexpected token: PVR @ line 1, column 21.
Dec 08 15:03:50: !readLines(/volume1/PVR/ExcludeShows.txt).contains(n)
Dec 08 15:03:50: ^
Dec 08 15:03:50: 
Dec 08 15:03:50: 1 error
Dec 08 15:03:50: 
Dec 08 15:03:50: Finished without processing any files
Dec 08 15:03:50: Abort (×_×)
SysInfo:

Code: Select all

FileBot 4.8.6 (r6868)
JNA Native: 6.1.0
MediaInfo: 19.04
7-Zip-JBinding: 9.20
Chromaprint: 1.4.3
Extended Attributes: OK
Unicode Filesystem: OK
Script Bundle: 2019-12-07 (r610)
Groovy: 2.5.8
JRE: OpenJDK Runtime Environment 13.0.1
JVM: 64-bit OpenJDK 64-Bit Server VM
CPU/MEM: 4 Core / 522 MB Max Memory / 26 MB Used Memory
OS: Linux (amd64)
HW: Linux NetStore 3.10.105 #24922 SMP Wed Jul 3 16:37:24 CST 2019 x86_64 GNU/Linux synology_avoton_1815+
STORAGE: ext4 [/] @ 1.2 GB | btrfs [/volume1] @ 7 TB
DATA: /volume1/@appstore/filebot/data/admin
Package: SPK
License: FileBot License P9013368 (Valid-Until: 2020-08-23)
Done ヾ(@⌒ー⌒@)ノ
User avatar
rednoah
The Source
Posts: 22899
Joined: 16 Nov 2011, 08:59
Location: Taipei
Contact:

Re: --filter and fine-tuning

Post by rednoah »

YES:

Code: Select all

!readLines('/path/to/excludes.txt').contains(n)
:idea: This is the value you want to pass in.

NO:

Code: Select all

!readLines(/volume1/PVR/ExcludeShows.txt).contains(n)
:!: This is the value you are actually passing in, which is syntactically incorrect Groovy code, hence syntax errors.


Hence:

Code: Select all

--filter '!readLines("/path/to/excludes.txt").contains(n)'
:arrow: Please read Cmdline and Argument Passing for details.
:idea: Please read the FAQ and How to Request Help.
sblack55
Posts: 22
Joined: 23 Sep 2015, 18:43

Re: --filter and fine-tuning

Post by sblack55 »

rednoah wrote: 09 Dec 2019, 10:51 Hence:

Code: Select all

--filter '!readLines("/path/to/excludes.txt").contains(n)'
Got it working, thanks!

(Single-quotes, double-quotes, substitutions, no substitutions... sheesh, I'm dizzy!)
kriz84
Posts: 3
Joined: 09 Dec 2019, 12:37

Re: [BTC] Purchase FileBot with Crypto Currency

Post by kriz84 »

Hello!
i would pay the lifetime license with Bitcoin.
is this possible? and the new 4.9.0 Betas should be no problem with the license?

greets
User avatar
rednoah
The Source
Posts: 22899
Joined: 16 Nov 2011, 08:59
Location: Taipei
Contact:

Re: [BTC] Purchase FileBot with Crypto Currency

Post by rednoah »

Sorry, only 1 year license is available via crypto at this point.
:idea: Please read the FAQ and How to Request Help.
Post Reply