POSTBUCKET - where random posts in unrelated topics go

[rednoah]

They go into this directory:
https://support.plex.tv/articles/202915 ... y-located/

Plex might pick them up from different locations though. Maybe your plug-in directory will work too.

[ziki]

Hey. I purchased the MAS version without realizing I'll be missing some functionality (mainly the subtitles). Is it possible to get the full version? It's a lot of money for an app with missing features. Sure, my bad for not doing the research, but to be fair, neither app store or your main web page mentions this.
Thanks for any help I get.

Cheers.

[rednoah]

Unfortunately, purchases from different stores and license systems are not interchangeable:
viewtopic.php?t=6265

I can offer 1 year complimentary universal licenses though:
viewtopic.php?t=9517

Apple does not allow the mentioning of features that are not in the MAS app. The FileBot website does however most prominently feature the direct purchase options for obvious reasons.

1/3 of the money you paid goes directly to Apple as reseller. You may judge their services and policies (e.g. Refund policy) for yourself and then decide to use or not use their services in the future.

[plittlefield]

Hello Reinhard,

I am currently on...

Code: Select all

FileBot 4.8.2 (r5789)
JNA Native: 5.2.2
MediaInfo: 18.05
7-Zip-JBinding: 9.20
Chromaprint: java.io.IOException: Cannot run program "fpcalc": error=2, No such file or directory
Extended Attributes: OK
Unicode Filesystem: OK
Script Bundle: 2019-02-26 (r552)
Groovy: 2.5.1
JRE: OpenJDK Runtime Environment 1.8.0_222
JVM: 64-bit OpenJDK 64-Bit Server VM
CPU/MEM: 4 Core / 3 GB Max Memory / 18 MB Used Memory
OS: Linux (amd64) Ubuntu 16.04.6 LTS
HW: Linux nas 4.15.0-15-generic #16~16.04.1-Ubuntu SMP Thu Apr 5 12:19:23 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
DATA: /home/paully/Downloads/filebot/data/paully
Package: TAR
License: FileBot License P8xxxxx3 (Valid-Until: 2020-07-31)
------------------- UPDATE AVAILABLE: FileBot 4.8.5 (r6224) --------------------
Done ヾ(＠⌒ー⌒＠)ノ

...what's my best option for upgrading to 4.8.5 and Java 11?

Thanks,

Paully

[rednoah]

The installer/deb.sh will add the repository and install FileBot for you:

Code: Select all

bash -xu <<< "$(curl -fsSL https://raw.githubusercontent.com/filebot/plugins/master/installer/deb.sh)"

Have you tried this yet?


Presumably, on Ubuntu 16.04, this will install Java 8 and and the Java 8 build of FileBot 4.8.5, since Java 11 / JavaFX 11 is only available for newer platforms.

[nicoparker]

Hello everyone, I have a quick question : I'm using Filebot on a Ubuntu headless server (16.04) and the 4.7.9 was working fine with openjdk-8-jre-headless. The latest .deb (4.8.5) required though the full openjdk-8-jre and pulled over 200MB of libs.
Is there any good reason behind it or is it just a package error?
Regards

[rednoah]

libjna is the only required package dependency:

Code: Select all

Depends: libjna-java
Recommends: default-jre, openjfx, mediainfo, libchromaprint-tools, p7zip-full, unrar | unrar-free
Enhances: nautilus-actions

The deb.sh installer script will however install all recommended dependencies, to make sure everything works out of the box regardless of your specific use case:

Code: Select all

sudo apt-get install --install-recommends -y filebot

[nicoparker]

Hmm that's strange, I swear the openjdk-jre8 (and the libs) were listed as a dependency... Any possible mistake on my side?

PS : I didn't use any script, just downloaded the .deb and dpkg -i

PPS : the libjna is the problem, it recommends the default-jre (but not headless)

[rednoah]

You should be able to install everything like so:

Code: Select all

sudo apt-get install --no-install-recommends -y filebot

That should only install the lib-jna and filebot packages with bare minimum dependencies.

[apeg]

With all the problems TVDB has been having this is exactly what i'm looking for but im having a few problems, the behavior of these options are different in 'generic batch renaming mode':

{n} = full file name minus extension
{'Season '+s} = full file name minus extension
{fn} = blank no value

I'm primarily using filebot for sorting in this case, generic batch renaming is exactly what i need so i dont run into issues every time TVDB is having problems. But show name, season and full file name are still needed.

Any ideas? thanks,

[rednoah]

In plain file mode:
* n is the filename
* fn is the filename, as usual, same as n in this case
* s is undefined, since files don't have seasons


If you want SxE numbers, or titles, or anything, then you'll have to extract that piece of information by parsing the file name, since the file name is all you've got:

Code: Select all

{f.path.match(/Season (\d+)/)}

How to parse information from the file name is highly reliant on the file names you have.

[nicoparker]

So I gave the repo a try, but failed :

Code: Select all

[email protected]:~# apt-key adv --fetch-keys "https://raw.githubusercontent.com/filebot/plugins/master/gpg/maintainer.pub"
Executing: /tmp/tmp.kuHJZvQopu/gpg.1.sh --fetch-keys
https://raw.githubusercontent.com/filebot/plugins/master/gpg/maintainer.pub
gpgkeys: protocol `https' not supported
gpg: no handler for keyserver scheme `https'
gpg: WARNING: unable to fetch URI https://raw.githubusercontent.com/filebot/plugins/master/gpg/maintainer.pub: keyserver error

Code: Select all

[email protected]:~# wget https://raw.githubusercontent.com/filebot/plugins/master/gpg/maintainer.pub
--2019-11-23 02:03:01--  https://raw.githubusercontent.com/filebot/plugins/master/gpg/maintainer.pub
Resolving raw.githubusercontent.com (raw.githubusercontent.com)... 151.101.36.133
Connecting to raw.githubusercontent.com (raw.githubusercontent.com)|151.101.36.133|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 4650 (4.5K) [text/plain]
Saving to: ‘maintainer.pub’

maintainer.pub           100%[===============================>]   4.54K  --.-KB/s    in 0s      

2019-11-23 02:03:01 (17.9 MB/s) - ‘maintainer.pub’ saved [4650/4650]

[email protected]:~# apt-key adv maintainer.pub 
Executing: /tmp/tmp.5dmHdLUYIf/gpg.1.sh maintainer.pub
pub  4096R/7C3C6A71 2017-04-13 Reinhard Pointner <r[email protected]>

Hmmm looks like it worked. Next step, add the repo and apt update :

Code: Select all

[email protected]:~# apt update
Ign:9 https://get.filebot.net/deb universal-jdk8 InRelease
Get:10 https://get.filebot.net/deb universal-jdk8 Release [1,165 B]
Get:11 https://get.filebot.net/deb universal-jdk8 Release.gpg [862 B]
Ign:11 https://get.filebot.net/deb universal-jdk8 Release.gpg
Reading package lists... Done    
W: GPG error: https://get.filebot.net/deb universal-jdk8 Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 4E402EBF7C3C6A71
E: The repository 'https://get.filebot.net/deb universal-jdk8 Release' is not signed.
N: Updating from such a repository can't be done securely, and is therefore disabled by default.
N: See apt-secure(8) manpage for repository creation and user configuration details.

Looks like I have a problem with the signature. What did I do wrong?
Regards

[rednoah]

1.
What version of Ubuntu are you using?

2.
Did you use the install script which pre-installs the necessary dependencies, such as gnupg-curl?
https://github.com/filebot/plugins/blob ... deb.sh#L13

Code: Select all

bash -xu <<< "$(curl -fsSL https://raw.githubusercontent.com/filebot/plugins/master/installer/deb.sh)"

[plittlefield]

I am currently on FileBot 4.8.2 using the .deb package by hand (a long time ago.)

I've just seen this latest post and out of interest I went through the github script step-by-step with the --simulate option to see what would happen, because this is a headless server with no gui needed.

All was going well but then the last command WAS going to pull in 90 packages which I really don't need

Code: Select all

sudo apt-get --simulate install --install-recommends filebot

So, I changed the install command line to...

Code: Select all

sudo apt-get --simulate install --no-install-recommends filebot

...which was a little better at 45 packages, but those were still loads of X Server related packages.

Is there any way to stop it installing ANY of those?



Thanks,

Paully

[rednoah]

You can always use the portable and then figure out dependencies manually if disk space is an issue:
viewtopic.php?f=11&t=6057


That being said, according to the package metadata, libjna-java is the only hard dependency, and everything else is optional:

Code: Select all

Depends: libjna-java
Recommends: default-jre, openjfx, mediainfo, libchromaprint-tools, p7zip-full, unrar | unrar-free
Enhances: nautilus-actions

[plittlefield]

Space is not a problem, I'm just trying to keep my system lean and mean with as few packages as possible installed and needing to be updated

OK, so the Beta 4.9.0 is an option with just that 1 dependency, and it seems to only install 2 packages when I simulate...

Code: Select all

$ sudo apt-get --simulate install libjna-java
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following additional packages will be installed:
  libjna-jni
Suggested packages:
  libjna-java-doc
The following NEW packages will be installed
  libjna-java libjna-jni
0 to upgrade, 2 to newly install, 0 to remove and 4 not to upgrade.
Inst libjna-jni (4.2.2-1 Ubuntu:16.04/xenial [amd64])
Inst libjna-java (4.2.2-1 Ubuntu:16.04/xenial [all])
Conf libjna-jni (4.2.2-1 Ubuntu:16.04/xenial [amd64])
Conf libjna-java (4.2.2-1 Ubuntu:16.04/xenial [all])

...so are you saying that if I install the Beta 4.9.0 deb package, without the 75 recommended packages, my server will not start trying to install them at a later date?

Is there a way to test that?

I guess I could press CTRL+C if it kicks off

Regards,

Paully

[plittlefield]

Also, is it best to remove 4.8.2 before I install the Beta 4.9.0 for cleanliness?

[rednoah]

IDK. If you don't want surprised, then you can just not use the apt repository and manage things manually. Regardless, new version will override the old version, apt takes care of that, so no need to worry about cleanliness.

[yodaspowart]

As the TVDB is down for me on my seedbox (Linux/amc groovy script),
I am now using

Code: Select all

unsortedFormat

Managing to connect and rename to this online FTP folder fine using Mountain Duck and the latest Filebot which is working fine on my Mac.

Code: Select all

--def unsorted=y --def unsortedFormat="Unsorted/{fn =~ /2160p|4K|4k|UHD/ ? 'UHD-2160p/' : fn =~ /1080p/ ? 'HD-1080p' : fn =~ /720p/ ? 'HD-720p' : 'SD'}/{fn}.{ext}"

I have now got TV shows into specific folders for resolution.

Would like to use the file naming setup to match the name of the show in a certain way:
Original file name:

Code: Select all

Legacies.S02E01.HDTV.x264-KILLERS[eztv].mkv

Wanted: Legacies - S02E01 - HDTV x264-KILLERS[eztv]

Not sure how it can be cleaner?

Code: Select all

{fn.before(/S\d{2}E\d{2}/).space(' ')} - {fn.match(/S\d{2}E\d{2}/).space(' ')} - {fn.after(/S\d{2}E\d{2}/).space(' ')}

Using the filebot GUI to test in file mode:

[rednoah]

If it works, I'd leave it at that. Once you start parsing file names yourself, things necessarily level up in terms of complexity.

If simplification is the goal, at the cost of getting exactly what you want, then here's my solution:

Code: Select all

{fn.replaceAll(/[ .-]+/, ' - ')}

Code: Select all

Legacies - S02E01 - HDTV - x264 - KILLERS[eztv]

[plittlefield]

Ooooo, this could be the winning command line, which only installs 3 packages!

Code: Select all

$ sudo apt -s --no-install-recommends install /home/paully/Downloads/filebot/FileBot_4.9.0_universal-jdk8.deb

Reading package lists... Done
Building dependency tree       
Reading state information... Done
Note, selecting 'filebot' instead of '/home/paully/Downloads/filebot/FileBot_4.9.0_universal-jdk8.deb'
The following additional packages will be installed:
  libjna-java libjna-jni
Suggested packages:
  libjna-java-doc
Recommended packages:
  openjdk-8-jre openjfx libchromaprint-tools p7zip-full unrar | unrar-free
The following NEW packages will be installed
  filebot libjna-java libjna-jni
0 to upgrade, 3 to newly install, 0 to remove and 6 not to upgrade.
Inst libjna-jni (4.2.2-1 Ubuntu:16.04/xenial [amd64])
Inst libjna-java (4.2.2-1 Ubuntu:16.04/xenial [all])
Inst filebot (4.9.0 local-deb [all])
Conf libjna-jni (4.2.2-1 Ubuntu:16.04/xenial [amd64])
Conf libjna-java (4.2.2-1 Ubuntu:16.04/xenial [all])
Conf filebot (4.9.0 local-deb [all])

...will filebot work without all the recommended packages?!

Also, I am only running OpenJDK Java v8...

Code: Select all

openjdk version "1.8.0_222"
OpenJDK Runtime Environment (build 1.8.0_222-8u222-b10-1ubuntu1~16.04.1-b10)
OpenJDK 64-Bit Server VM (build 25.222-b10, mixed mode)

Am I good to go?!



Paully

[plittlefield]

OK, so I went for it.

Turns out my current filebot was just a symlink to the TAR version, which made things easier.

Here are my upgrade / install commands as root...

Code: Select all

$ apt install p7zip-full unrar
$ apt --no-install-recommends install FileBot_4.9.0_universal-jdk8.deb

So, I now have this...

Code: Select all

$ filebot -script fn:sysinfo
FileBot 4.9.0 (r6899)
JNA Native: 4.0.1
MediaInfo: 19.09
p7zip: p7zip Version 9.20 (locale=en_GB.UTF-8,Utf16=on,HugeFiles=on,4 CPUs)
unrar: UNRAR 5.30 beta 2 freeware
Chromaprint: java.io.IOException: Cannot run program "fpcalc": error=2, No such file or directory
Extended Attributes: OK
Unicode Filesystem: OK
Script Bundle: 2019-11-16 (r603)
Groovy: 2.5.8
JRE: OpenJDK Runtime Environment 1.8.0_222
JVM: 64-bit OpenJDK 64-Bit Server VM
CPU/MEM: 4 Core / 3.7 GB Max Memory / 33 MB Used Memory
OS: Linux (amd64)
HW: Linux nas 4.15.0-15-generic #16~16.04.1-Ubuntu SMP Thu Apr 5 12:19:23 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux
STORAGE: ext4 [/] @ 106 GB | fuse.sshfs [/home/paully/Downloads/seedbox2] @ 990 GB
DATA: /home/paully/.filebot
Package: DEB
License: FileBot License xxxxxxxx (Valid-Until: 2020-07-31)
Done ヾ(＠⌒ー⌒＠)ノ

...cannot wait to try it out!

Fingers crossed!

Thanks!

Regards,

Paully

[yodaspowart]

Thanks a lot @rednoah also for quick reply.
It's perfect for me.

[yodaspowart]

Updated my unsorted folder now:

Currently it's working in case anyone is interested in this:

Code: Select all

--def unsorted=y --def unsortedFormat="Unsorted/{fn =~ /2160p|4K|4k|UHD/ ? 'UHD-2160p/' : fn =~ /1080p/ ? 'HD-1080p' : fn =~ /720p/ ? 'HD-720p' : 'SD'}/{fn.before(/S\d{2}E\d{2}/).upperInitial().space(' ')} - {fn.match(/S\d{2}E\d{2}/).upper()} - {fn.after(/S\d{2}E\d{2}/).stripReleaseInfo().upperInitial().space(' ')} [{allOf{match}{s3d}{hd}{vc}{source}{vf}{('-')}{af}{ac}{channels}{n.findMatch(group) ? null : '- '+group} join ' '}].{ext}" --def exec="curl --insecure https://seedBoxPlexURL:port/library/sections/all/refresh?X-Plex-Token=XXXXXXXXXXXXXXXXXX_X"

Now Plex can pull in the TV shows from my: HD-1080p & UHD-2160p folders.
This is a fallback until TVDB is up and running.
I'm still renaming them properly with the Filebot GUI 4.8.5 through Mountain Duck mounted online FTP drive

Movies rarely go into unsorted.
If they end up here would get named like this:
Original name:

Code: Select all

A.Christmas.Tale.2008.Criterion.576p.BDRip.x264.AC3-Q0S.mp4

becomes:

Code: Select all

A Christmas Tale 2008 Criterion 576p BDRip X264 AC3-Q0S - - A Christmas Tale 2008 Criterion [HD AVC BDRip 1080p - 2ch AAC 2.0]

[plittlefield]

Yep, all good

With 4.9.0 the process seems to be faster and better at matching titles.

Thanks for your help and keep up the great work on this time-saving gem.

Paully