After Update to Filebot 5.1.6 OpenSubtitleLogin doesn't work anymore

[Punx]

Hi Noah

If i look in the Logs after Update

Code: Select all

WARNUNG: Activate License [PXxxxx] on [Sat Dec 28 16:07:10 CET 2024]
Dec 28, 2024 4:08:54 PM net.filebot.DiskStore acquireDiskStore
WARNUNG: Current application revision (r10435) does not match cache revision (r10185)
Dec 28, 2024 4:08:54 PM net.filebot.DiskStore acquireDiskStore
WARNUNG: Initialize new disk cache: C:\Users\%user%\AppData\Roaming\FileBot\cache\0
Dec 28, 2024 4:09:01 PM net.filebot.ui.subtitle.SubtitlePanel lambda$promptLogin$3
WARNUNG: OpenSubtitles: Client Error: https://api.opensubtitles.com/api/v1/login [401 Unauthorized Request]

Befor i could Login on my 2nd System i have the 5.1.6 and also no Login possible so i tried it on my Gaming System and the Same with 5.1.6

Any Solution u suggest

[rednoah]

FileBot 5.1.6 uses the OpenSubtitles REST API by default. This also means that you now need to use your opensubtitles.com (not opensubtitles.org) login details. I recommend using the same username / password on both sites as to avoid confusion.


What does filebot -script fn:configure say?

Shell: Select all

filebot -script fn:configure

[Punx]

it says

Code: Select all

Enter OpenSubtitles username: Enter OpenSubtitles password: Store user preferences to [User Preference Node: /net/filebot at HKEY_CURRENT_USER\Software\JavaSoft\Prefs]
Reset OpenSubtitles login details
Done ヾ(＠⌒ー⌒＠)ノ
Result: 0

If i login on 5.1.5 again OpenSubtitle works
on 5.1.6 no chance to login

[rednoah]

If you're running filebot -script fn:configure without interactive terminal (presumably you're using docker via some WebUI) then the terminal cannot prompt you to enter your username / password:

Code: Select all

Enter OpenSubtitles username: Enter OpenSubtitles password: 

So you have to to pass everything along via the command-line:

Shell: Select all

filebot -script fn:configure --def osdbUser="username" --def osdbPwd="password"

[Punx]

Code: Select all

Store user preferences to [User Preference Node: /net/filebot at HKEY_CURRENT_USER\Software\JavaSoft\Prefs]
Set OpenSubtitles login details
Checking... Your login details are incorrect. Please go to www.opensubtitles.com (REST API; not www.opensubtitles.org) to check your login details and reset your password if necessary.
https://api.opensubtitles.com/api/v1/login [401 Unauthorized Request]
Abort (×_×)
Result: 4

filebot -script fn:configure --def osdbUser="Manted86" --def osdbPwd="here is my PW "

Im logged in on OS webpage with this USer and Pass

[rednoah]

Im logged in on OS webpage with this USer and Pass

Can you post a link to the OS webpage? (since there is the old OS webpage and the new OS webpage so I need to confirm which one you mean)



EDIT:

If i login on 5.1.5 again OpenSubtitle works
on 5.1.6 no chance to login

To clarify what I was trying to say in my previous post:
* If you use 5.1.5 then you must use your OpenSubtitles.org username / password.
* If you use 5.1.6 then you must use your OpenSubtitles.com username / password.

.org is the old site, .com is the new site, the old site and the new site may have a different username / password.

[Punx]

Yep thats is it but i have a subscription 4 .org not com

[rednoah]

Yes, FileBot 5.1.6 requires the login details you have set up with the new OpenSubtitles site:

Code: Select all

Your login details are incorrect. Please go to www.opensubtitles.com (REST API; not www.opensubtitles.org) to check your login details and reset your password if necessary.

EDIT:

You can configure FileBot 5.1.6 to use the old API (i.e. work exactly the same as older versions of FileBot) but do note that the old API may be sunset and disabled by OpenSubtitles at some unspecified point in the future. See OpenSubtitles REST API › Configure FileBot to use the old OpenSubtitles XML-RPC API for details.

[Punx]

That i have tried

Code: Select all

Load user-defined System Properties
* Read C:\Users\%user%\AppData\Roaming\FileBot\system.properties
Update user-defined System Properties
* Set net.filebot.WebServices.OpenSubtitles.v1 = true
Store user-defined System Properties
* Write C:\Users\%user%\AppData\Roaming\FileBot\system.properties
#FileBot System Properties
#Sat Dec 28 17:55:08 CET 2024
net.filebot.WebServices.OpenSubtitles.v1=true


Done ヾ(＠⌒ー⌒＠)ノ
Result: 0

After that i used the Login Button same error

* edit after restart the Filebot it works thx a lot

[rednoah]

You do indeed need to restart FileBot after changing system settings, as system settings are only read on startup.

[richyb]

I've been having trouble with OpenSubtitles for sometime on FIlebot 5.1.6 on Synology and eventually tracked down to my password using special characters (@, # and * were all being used). I changed the password to one just using alphabetical, numericals and the exclamation mark and all started working on both the v1 (.org) and v2 (.com) APIs.

[rednoah]

What was the special password that didn't what that you are now no longer using?

How did you set your password? If you're using command-line arguments then you may need to take special care if the passwords starts with an @ (because @file syntax) or contains $*'" (because shell variable expansion).

[richyb]

Hi @rednoah, It was a password such as j3430dc@i3j2j*snj2#23 (the * and the hash might have been the other way round). I was setting them via the Filebot Node GUI on Synology. Obviously those are passed from NodeJS to Filebot itself via a command line argument, but I was hoping/expecting sufficient escaping to have taken place.

[rednoah]

If you're using FileBot Node then the argument array will be passed as part of the system call. No shell or command-line parser is involved, thus there is nothing to escape. Whatever the underlying issue may have been, this is probably not it.


I've changed the password of my test account to j3430dc@i3j2j*snj2#23 and it works as expected:

Console Output: Select all

filebot -script 'fn:configure' --def 'osdbUser=...' 'osdbPwd=j3430dc@i3j2j*snj2#23' --log-file '/server-nodejs/data/filebot.log'

------------------------------------------

Store user preferences to [User Preference Node: /net/filebot at /data/.java/.userPrefs]
Set OpenSubtitles login details
Checking... OK

allowed_translations: 1
allowed_downloads: 20
level: Sub leecher
user_id: ...
ext_installed: false
vip: false
downloads_count: 0
remaining_downloads: 20
username: ...
Done ヾ(＠⌒ー⌒＠)ノ

------------------------------------------

[Process completed]